Hydraulic Pivoting Head Plugging Machine - FD300
This Hydraulic Plugging Machine is used for plugging operation on the oil, gas, steam lines with the operation pressure up to maximum ANSI Class 600 (1450psi) for line stop which is the kind of technique of isolating a section pipeline for repairs or addition without interruption services .
1. Product Introduction :
Hydraulic Plugging Machine FD500 is designed for suspended plugging operation on Oil or Gas Lines with the maximum operation pressure up to ANSI Class 600 ( 100 bar / 1450 psi) .
2. Product Picture :
3. Technical Specification :
| Product name |
Model |
Technical parameters |
| Suspended manual plugging machine |
FD500 |
Stopple range: 14''-28'' |
| Max Operating pressure:100bar/1450psi |
| Spindle diameter:Φ140mm |
| Max travel distance :2700mm /106 inch |
| Transmission mode :Hydraulic |
| Feed capacity:0-300mm stepless regulation |
4. List of all models of Suspended Type Plugging Machine
| Parameters |
Applied size |
Main shaft diameter |
Maximum stroke |
Transmission mode |
Feed capacity |
Applied pressure |
| Model |
| |
mm |
inch |
mm |
mm |
|
|
bar |
| FD150 |
DN100-150 |
4″ ~ 6″ |
Φ80mm |
750mm |
manual |
6mm/r |
≤100 |
| FD300 |
DN200-300 |
8″ ~ 12″ |
Φ90mm |
1750mm |
hydraulic |
0~300mm stepless speed regulation |
≤100 |
| FD500 |
DN350-700 |
14″ ~ 28″ |
Φ140mm |
2700mm |
hydraulic |
≤100 |
| FD1000 |
DN800-1200 |
32'' ~ 48'' |
Audited Supplier 
){kind=link}
){kind=link}