HT50 Manual Hot Tapping Machine
Introduction :
This machine is designed for hot tapping on the mains under pressure for the branch pipeline joint.
It is suit for Ductile Iron Pipe, Carbon Steel Pipe and Plastic Pipe .
And it is widely applied in water supply, natural gas supply, oil and chemical industry .
Feature :
1. Manual Operation
2. light weight, portable, labor-saving
3. the machine in good sealing with the gasket of interface between the main spindle and driving spindle
Technical Parameter :
| HT50 Manual Hot Tapping Machine |
| |
| 1 |
Tapping Sizes |
3/4'', 1/2'', 1'', 2'' |
| 2 |
Max Working Pressure |
1.6 Mpa |
| 3 |
Feed Mode |
Manual |
| 4 |
Feed Volume |
1.5 mm/r |
| 5 |
Working Stroke |
170/240mm |
| 6 |
Working Temperature |
-20ºC ~80ºC |
| 7 |
Dimensions |
470x170x160mm |
| 540x170x160mm |
List of Models :
Product Display :
Project Case :
Hot Tapping Fitting :
Note: we supply the above hot tapping fittings .
Company Profile :
Anqing Great Wall Pipeline Company have over 10 years experience of the production and development of
Electric and Manual Hot Tapping machine for water, oil and gas lines with the pressure rating of PN10, PN16, PN25,
the range of hot tapping sizes from DN25mm up to DN1600mm.
our hot tapping machine are exported to the countries and regions including Singapore, Malaysia, Indonesia,
Taiwan, UAE, Chile, Argentina, Brazil and etc.
Audited Supplier 
){kind=link}